
Full View
Hasonló tételek
HIFI Base On Lehmann Class A Headphone Amplifier LEM Preamplifier DIY Kit/Finished Board
16.256,09Ft17.067,12Ft
Szín : DIY Kit


Mennyiség :
Jelentés
Tartalmazza a szerzői jogok megsértésétIngyenes normál kiszállítás. Lásd a részleteket
Becsült értéke Mon, Jul 13 és Sat, Jul 18 között
A terméket az átvételtől számított 30 napon belül visszaküldheti. Lásd a részleteket
Vásároljon bizalommal
Pénz-visszafizetési garancia
Kapja vissza a megrendelt terméket vagy a pénzét. További információ
About this item
Forrás: 3C electronics mall
Seller assumes all responsibility for this listing.Cikkszám: 37847580
Item specifics
Állapot
Új
Item description from the seller
About Lehmann:
Lehmann (Lehmann) from Germany, is a specially designed phono amplifier and headphone amplifier fever of plants.
Lehmann headphone amplifier (Lehmannaudio Black C-ube Linear), referred to as the big Lehmann, is an enthusiast of the high visibility amp, and Graham Slee Solo headphone amp is around 5,000 yuan price as well-known model (brand).
Lehmann put ear S-ennheiser HD650 players known as the best partner in Europe exhibitions and professional sound studio is said to have a good reputation, even by many fans regarded as the Rolls Royce of the amp, amp comes with two 6.35 mm diameter headphone signal output interface, Lehmann with an impedance of 300 ohms headphones output power of 200mW, 400mW output power can be achieved when the mating impedance of 60 ohms impedance headphones, and its frequency range between 10Hz-35kHz, 95dB of noise ratio can reach more than, superior sound performance of the industry unanimous praise, the famous German record company STS Digital fever and the Netherlands have chosen Black Cube Linear The Master studio for listening purposes.
Use ST BD139/BD140 Medium power transistor, JRC5532DD Op amp.
The main filter capacitor adopts Nichicon 4700uF/35V x2, VISHAY MKT coupling capacitors. VISHAY and EPCOS decoupling capacitors. High-quality gold-plating6.35mm headphone jack. ALPS 16 type 50KA Potentiometer.
◆ Input voltage: AC 15V--0--15V
◆ PCB Size: 107 * 150mm
◆ Frequency response: 10Hz (-0.3db) - 35KHz (-1db)
◆ Distortion: <0.001% (6mW / 300R)
◆ SNR:> 95db
◆ Output power: 200mW / 300R; 400mW / 60R
◆ Power consumption: <5W
◆ Input impedance: 47kΩ
◆ Adapter Impedance: 8 - 2K
◆ Output Interface: 6.35mm X 2
◆ LINE OUT: 60Ω
◆ PHONE OUT: 5Ω
NOTE: We have DIY kit or finished board (Optional)
◆ DIY kit ---- All parts need you to solder and test it.
◆ Finished board ---- All parts have been welded and tested OK.
















